FLEXART INKS, PAINTS & COATINGS, INC.                                             Phone 949-595-0538

22981 Triton Way Unit B                                                                                    For Medical & Emergency Only

Laguna Hills, CA 92653                                                                                     Contact Infotrac (800) 535-5053

                                                                                                                                Prepared Date: 01-01-2009

                                                MATERIAL SAFETY DATA SHEET

 

1. PRODUCT INFORMATION

 

PRODUCT NAME: POLY/DYNE TREATMENT PEN 38-40

 

2. HAZARDOUS INGREDIENTS

 

CHEMICAL NAMES          CAS#     OSHA PEL            STEL                      ACGIH TLV          WT%

 

* Methyl Hydrate                                67-56-1    200ppm  250ppm                  200ppm                  >99.5%

* Dowanal DB                      100-51-6  200ppm                                  200ppm                  <6%

 

                (.) Those items preceded by an asterisk (*) are reportable under section 313 of Title III of the

                     superfund amendments and reauthorization act of 1986 (SARA)

 

3. PHYSICAL DATA

 

BOILING POINT: 64.6 C (148 F) at 760 mm Hg                SPECIFIC GRAVITY: 0.7925 (H20=1)

VAPOR DENSITY: 1.105 at 15 C (59 F) (air=1)                                EVAPORATION RATE: 2.1

VAPOR PRESSURE: 96 mm Hg at 20C(68 F)                    (n.Bu.Acet.=1)

WEIGHT PER GALLON: N/E                                                             % VOLATILE RATE:    100%

SOLUBILITY IN WATER: Soluble                                   Molecular Wt. 32.04

APPEARANCE & ODOR: Blue Liquid/mild alcohol odor.            PH: N/A

 

4. HEALTH HAZARD DATA

 

SKIN CONTACT: May cause moderate irritating to skin.  Prolonged contact may cause defatting of the skin. *

 

EYE CONTACT: Causes eye irritation. Is a severe eye irritant.

 

INHALATION: Inhalation of concentrated vapor may cause irritation to nose, throat and respiratory tract.

Overexposure to vapors may cause headache, vertigo, nausea, vomiting and diarrhea.  Over-exposure can cause CNS (central Nervous System) depression.

 

INGESTION: Harmful if swallowed.  May cause blindness or death.

 

SIGNS AND SYMPTOMS: Irritations as noted above.  Early to moderate CNS (Central Nervous System)

Depression may be evidenced by giddiness, headache, dizziness and nausea:  In extreme cases unconsciousness and death may occur.

 

AGGRAVATED MEDICAL CONDITIONS:  If used as packaged in this pen, there are none.

 

EMERGENCY FIRST AID PROCEDURES:

 

EYE CONTACT: Flush immediately with water for 15minutes ensuring all surfaces and crevices are flushed by lifting lower and upper lids.  Get medical attention.         

 

Poly/Dyne Treatment Pen                                                                                               

 

EMERGENCY FIRST AID PROCEDURES CONTINUED:

SKIN CONTACT: Remove contaminated clothing.  Wash under shower with soap and water for 15 minutes.  Seek medical attention if irritation persists.  Do not re-use clothing until cleaned.

 

INHALATION: If swallowed, call a physician immediately, Induce vomiting only on advice of medical personnel.  Never give anything by mouth to an unconscious person.

 

CARCINOGENCITY:  This material is not considered a carcinogen by the N.P.T., I.A.R.C. or O.S.H.A

 

*Defatting and drying of the skin may result in skin irritation and dermatitis.

 

5. FIRE & EXPLOSION HAZARD DATA

FLASH POINT: 15.6 C (60 Deg. F) (TOC)       METHOD USED: TCC (52 Deg. F TCC)

FLAMMABLE LIMITS IN AIR BY VOLUME:  Lower: 6          UPPER: 36.5

EXTINGQUISHING MEDIA: Small Fires: Use CO2, foam or dry chemical.

SPECIAL FIRE FIGHTING PROCEDURES & PRECAUTIONS: None.

 

6. REACTIVITY DATA

STABILITY: Yes/Stable  CONDITIONS TO AVOID: Heat, sparks and open flame.

INCOMPATABILITY:  (Materials to avoid) Contact with strong acids, isocyanates, alkalies or oxidizers.

HAZARDOUS DECOMPOSIOTION PRODUCTS: Formaldehyde, carbon dioxide may produce carbon monoxide.

HAZARDOUS POLYMERIZATION: WILL NOT OCCUR

 

7. SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED: None as packaged in a pen.

WASTE DISPOSAL METHOD: Consult federal, state, or local disposal authorities for approved procedures.

 

8. SPECIAL PROTECTION PROCEDURES

RESPIRATORY PROTECTION: None unless concentrations exceed the PEL or ACGIL values as shown in section II.

VENTILATION: Allow access to open air.

LOCAL EXHAUST: Recommended when appropriate to control employee exposure.

MECHANICAL (GENERAL): not recommended.

PROTECTIVE GLOVES: None if used as packaged.

EYE PROTECTION: None if used as packaged.

 

9. SPECIAL PRECAUTIONS

Keep pens away from heat, sparks and open flame.  Wash with soap and water before eating, drinking, smoking or using toilet facilities.  Launder contaminated clothing before use.

 

10. TRANSPORTATION REQUIREMENTS:

Department of Transportation Classifications: None

 

Date: Prepared: 01/01/2009

 

Disclaimer: While Flexart Inks, Paints & Coatings Inc. believes that the data set forth in this sheet is accurate; Flexart Inks, Paints & Coatings Inc. makes no warranty with respect thereto and expressly disclaims all liability for reliance thereon.

 

PLEASE READ INFORMATION CAREFULLY.